Alcatel-Lucent OmniAccess Stellar AP1351 Tri Band 802.11ax 10.75 Gbit/s Wireless Access Point - Indoor - 2.40 GHz, 5 GHz - Internal - MIMO Technology - 2 x Network (RJ-45) - 10 Gigabit Ethernet - PoE Ports - Bluetooth 5 - Wall Mountable, Ceiling Mountable
Alcatel-Lucent OmniAccess Stellar AP1351 Tri Band 802.11ax 10.75 Gbit/s Wireless Access Point - Indoor - 2.40 GHz, 5 GHz - Internal - MIMO Technology - 2 x Network (RJ-45) - 10 Gigabit Ethernet - PoE Ports - Bluetooth 5 - Wall Mountable, Ceiling Mountable
Alcatel-Lucent OmniAccess Stellar AP1351 Tri Band 802.11ax 10.75 Gbit/s Wireless Access Point - Indoor - 2.40 GHz, 5 GHz - Internal - MIMO Technology - 2 x Network (RJ-45) - 10 Gigabit Ethernet - PoE Ports - Bluetooth 5 - Wall Mountable, Ceiling Mountable
Photo is for Illustration purposes only. Actual Product may be different. Part Num:
OAW-AP1351-RWCondition: Brand New$1,455.00
Add To Cart
BUY MORE & SAVE
Need 5 or more of these on a single order?
Ask for a quotation here.
We generally respond within 3 business hours.
Close
Total price is...
Key Highlights
• When connected to a compatible router or a network switch, this wireless access point lets you enjoy wireless internet connectivity throughout your home or office
• Optimize the performance of your wired network connection with 10 Gigabit Ethernet connectivity
• Its management capability provides efficient control over setup and configuration of your network
The 802.11ax premium high-end OmniAccess Stellar AP1351 is designed to accommodate the very dense and high capacity needs of next generation mobility and IoT-enabled networks. These APs are powered with five built-in radios, three radios 2.4Ghz/5Ghz Low/5Ghz High band serving high density Wi-Fi clients, one full band radio dedicated for scanning, which can inherently improve network security and Wi-Fi quality, and an integrated Bluetooth/Zigbee radio enabling location and building automation services. The OmniAccess Stellar AP1351 series supports a maximum aggregate data rate of ?10Gbps (9.6Gbps in 5 GHz and 1.2Gbps in 2.4GHz). The access points dual 10Gbps uplinks provide POE resiliency and traffic load sharing.
The OmniAccess Stellar AP1351 supports 802.11ax (Wi-Fi 6) features, which include OFDMA, DL MU-MIMO, UL MU-MIMO, 1024-QAM modulation and more, making tomorrow's diverse digital workspaces highly reliable and efficient.
The OmniAccess Stellar AP1351 features enhanced WLAN technology with RF Radio Dynamic Adjustment, a distributed control Wi-Fi architecture, secure network admission control with Unified Access, built-in application intelligence and analytics, this makes it ideal for enterprises of all sizes that demand simple, secure and scalable wireless solution.
802.11 ax (Wi-Fi 6) High-efficiency features
IEEE 802.11ax allows enterprises to deliver high performance wireless LAN services with increased throughput, enabling more clients in dense environments and bringing power efficiency to IoT devices, while it remains fully backward compatible with existing 802.11 a/b/g/n/ac deployments. The 802.11ax standard is a dramatic step forward in wireless LAN technology for all organizations. Some of the key 802.11ax features enabled on OmniAccess Stellar AP1351 include:
- Orthogonal frequency division multiple access (OFDMA) enabling more clients to simultaneously operate in the same channel and thereby improving efficiency, latency, and throughput. OFDMA can concurrently address multiple clients in both directions downlink (DL) and uplink (UL), including OFDMA Resource Units (RUs). OFDMA is very effective in environments where there are many devices with short frames demanding lower latency.
- Multi-user multiple input, multiple output (MU-MIMO) allowing more data to be transferred at once and enables an access point to handle a larger number of concurrent clients.
- 1024 quadrature amplitude modulation mode (1024-QAM) boosting peak data-rates by as much as 25 percent.
- BSS Coloring improves spatial reuse in dense environments by providing a mechanism for color coding different overlapping BSS's, allowing more simultaneous transmissions.
- Extended Range (ER) provides increased coverage in scenarios where receiving side encounters high path loss and channel delay spread, especially in outdoor environments.
General Information
|
Manufacturer | Alcatel-Lucent |
Manufacturer Part Number | OAW-AP1351-RW |
Manufacturer Website Address | https://www.al-enterprise.com |
Brand Name | Alcatel-Lucent |
Product Line | OmniAccess Stellar |
Product Model | AP1351 |
Product Name | OmniAccess Stellar AP1351 Wireless Access Point |
Product Type | Wireless Access Point |
Technical Information
|
Wireless LAN Standard | 802.11ax |
Bluetooth Standard | Bluetooth 5 |
Network Band | Tri Band |
Frequency Band | 2.40 GHz | 5 GHz |
Indoor/Outdoor | Indoor |
Wireless Transmission Speed | 10.75 Gbit/s |
MIMO Technology | Yes |
Beamforming Technology | Yes |
Data Encryption | Yes |
Encryption Standard | WPA3 | WPA2 | WPA2-ENT | WPA3-ENT | WPA3-SAE | WEP | TKIP |
Interfaces/Ports
|
Ethernet Technology | 10 Gigabit Ethernet |
Number of Network (RJ-45) Ports | 2 |
PoE (RJ-45) Port | Yes |
PoE PD Port | Yes |
USB | Yes |
Management Port | Yes |
Physical Characteristics
|
Form Factor | Wall Mountable | Ceiling Mountable |
Antenna Form Factor | Internal |
Height | 2.36" (60 mm) |
Width | 10.24" (260 mm) |
Depth | 10.24" (260 mm) |
Weight (Approximate) | 2.37 kg |
Miscellaneous
|
Additional Information | Maximum (worst case) power consumption: - 45W (input IEEE 802.3bt POE); Unrestricted functionality
- 42W (input dual IEEE 802.3at POE); The USB port is disabled
- 24W (input IEEE 802.3at POE); The USB port is disabled, Eth1 port is disabled, tri radio downgrade to 2*2
|