Cendirect Canada

Product Comparison Remove all 6 max at a time	Alcatel-Lucent OAW-AP1351-RW $1,455.00 To Cart Remove
Manufacturer	Alcatel-Lucent
Manufacturer Part Number	OAW-AP1351-RW
Manufacturer Website Address	https://www.al-enterprise.com
Brand Name	Alcatel-Lucent
Product Line	OmniAccess Stellar
Product Model	AP1351
Product Name	OmniAccess Stellar AP1351 Wireless Access Point
Marketing Information	The 802.11ax premium high-end OmniAccess Stellar AP1351 is designed to accommodate the very dense and high capacity needs of next generation mobility and IoT-enabled networks. These APs are powered with five built-in radios, three radios 2.4Ghz/5Ghz Low/5Ghz High band serving high density Wi-Fi clients, one full band radio dedicated for scanning, which can inherently improve network security and Wi-Fi quality, and an integrated Bluetooth/Zigbee radio enabling location and building automation services. The OmniAccess Stellar AP1351 series supports a maximum aggregate data rate of ?10Gbps (9.6Gbps in 5 GHz and 1.2Gbps in 2.4GHz). The access points dual 10Gbps uplinks provide POE resiliency and traffic load sharing. The OmniAccess Stellar AP1351 supports 802.11ax (Wi-Fi 6) features, which include OFDMA, DL MU-MIMO, UL MU-MIMO, 1024-QAM modulation and more, making tomorrow's diverse digital workspaces highly reliable and efficient. The OmniAccess Stellar AP1351 features enhanced WLAN technology with RF Radio Dynamic Adjustment, a distributed control Wi-Fi architecture, secure network admission control with Unified Access, built-in application intelligence and analytics, this makes it ideal for enterprises of all sizes that demand simple, secure and scalable wireless solution. 802.11 ax (Wi-Fi 6) High-efficiency features IEEE 802.11ax allows enterprises to deliver high performance wireless LAN services with increased throughput, enabling more clients in dense environments and bringing power efficiency to IoT devices, while it remains fully backward compatible with existing 802.11 a/b/g/n/ac deployments. The 802.11ax standard is a dramatic step forward in wireless LAN technology for all organizations. Some of the key 802.11ax features enabled on OmniAccess Stellar AP1351 include: Orthogonal frequency division multiple access (OFDMA) enabling more clients to simultaneously operate in the same channel and thereby improving efficiency, latency, and throughput. OFDMA can concurrently address multiple clients in both directions downlink (DL) and uplink (UL), including OFDMA Resource Units (RUs). OFDMA is very effective in environments where there are many devices with short frames demanding lower latency. Multi-user multiple input, multiple output (MU-MIMO) allowing more data to be transferred at once and enables an access point to handle a larger number of concurrent clients. 1024 quadrature amplitude modulation mode (1024-QAM) boosting peak data-rates by as much as 25 percent. BSS Coloring improves spatial reuse in dense environments by providing a mechanism for color coding different overlapping BSS's, allowing more simultaneous transmissions. Extended Range (ER) provides increased coverage in scenarios where receiving side encounters high path loss and channel delay spread, especially in outdoor environments.
Product Type	Wireless Access Point
Wireless LAN Standard	802.11ax
Bluetooth Standard	Bluetooth 5
Network Band	Tri Band
Frequency Band	2.40 GHz 5 GHz
Indoor/Outdoor	Indoor
Wireless Transmission Speed	10.75 Gbit/s
MIMO Technology	Yes
Beamforming Technology	Yes
Data Encryption	Yes
Encryption Standard	WPA3 WPA2 WPA2-ENT WPA3-ENT WPA3-SAE WEP TKIP
Ethernet Technology	10 Gigabit Ethernet
Number of Network (RJ-45) Ports	2
PoE (RJ-45) Port	Yes
PoE PD Port	Yes
USB	Yes
Management Port	Yes
Form Factor	Wall Mountable Ceiling Mountable
Antenna Form Factor	Internal
Height	2.36" (60 mm)
Width	10.24" (260 mm)
Depth	10.24" (260 mm)
Weight (Approximate)	2.37 kg
Additional Information	Maximum (worst case) power consumption: 45W (input IEEE 802.3bt POE); Unrestricted functionality 42W (input dual IEEE 802.3at POE); The USB port is disabled 24W (input IEEE 802.3at POE); The USB port is disabled, Eth1 port is disabled, tri radio downgrade to 2*2

$1,455.00