Atlona 4K HDR HDMI Over HDBaseT TX/RX with Control and PoE - 1 Output Device - 229.66 ft (70000 mm) Range - 1 x Network (RJ-45) - 1 x USB - 1 x HDMI Out - 4K UHD - 4096 x 2160 - Twisted Pair - Category 7 - Power over Ethernet (PoE) - Projector
Atlona 4K HDR HDMI Over HDBaseT TX/RX with Control and PoE - 1 Output Device - 229.66 ft (70000 mm) Range - 1 x Network (RJ-45) - 1 x USB - 1 x HDMI Out - 4K UHD - 4096 x 2160 - Twisted Pair - Category 7 - Power over Ethernet (PoE) - Projector
Atlona 4K HDR HDMI Over HDBaseT TX/RX with Control and PoE - 1 Output Device - 229.66 ft (70000 mm) Range - 1 x Network (RJ-45) - 1 x USB - 1 x HDMI Out - 4K UHD - 4096 x 2160 - Twisted Pair - Category 7 - Power over Ethernet (PoE) - Projector
Atlona Technologies
Photo is for Illustration purposes only. Actual Product may be different. Part Num:
AT-HDR-EX-70C-RXCondition: Brand New
$433.03
Add To Cart
BUY MORE & SAVE
Need 5 or more of these on a single order?
Ask for a quotation here.
We generally respond within 3 business hours.
Close
Total price is...Introduction
The Atlona AT-HDR-EX-70C-RX is a HDBaseT™ to HDMI® receiver for 4K and high dynamic range (HDR) content. It supports extension of 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling plus HDR data, multi-channel audio, control signals, and power up to 130 ft. (40 m) or 1080p up to 230 ft. (70 m) over Category 6/6A cable. The AT-HDREX-70C-RX is ideal for use with the AT-HDR-CAT-2, AT-HDR-CAT-4, and AT-HDR-CAT-8 distribution amplifiers for passing 4K HDR signals to a display. A compact enclosure and remote power supplied by the transmitter means the receiver can be conveniently mounted in furniture, behind a display, or above a projector.
Key Features
- HDBaseT receiver for use with the AT-HDR-CAT-2, AT-HDR-CAT-4, and AT-HDR-CAT-8 distribution amplifiers
- 4K/UHD capability @ 60 Hz with 4:4:4 chroma sampling
- Supports HDR10, HLG, and Dolby® Vision™ HDR formats
- Features visually lossless compression with no latency to enable HDR and 4K/60 4:4:4 video signal extension over HDBaseT
- HDBaseT input receives HDMI, control signals, and power up to 130 feet (40 meters) for 4K HDR or 230 feet (70 meters) for 1080p with Category 6/6A
- Extends bidirectional RS-232 and IR control signals over HDBaseT
- Remotely powered by the AT-HDR-CAT distribution amplifiers over HDBaseT
- Compliant with HDCP 2.2, the latest specification for passing protected content between devices
- Multi-channel audio pass-through
- Front panel Power and Link status LEDs
- Front panel USB port for firmware updates
- Rear panel connections simplify wire management and save installation time
- Compact enclosure can be mounted in furniture, behind a display, or above a projector
General Information
|
| Manufacturer | Atlona Technologies |
| Manufacturer Part Number | AT-HDR-EX-70C-RX |
| Manufacturer Website Address | https://www.atlona.com |
| Brand Name | Atlona |
| Product Name | 4K HDR HDMI Over HDBaseT TX/RX with Control and PoE |
| Product Type | Video Extender Receiver |
Technical Information
|
| Connectivity Technology | Wired |
| Number of Output Devices Supported | 1 |
| Maximum Operating Distance | 229.66 ft (70000 mm) |
Video
|
| Graphics Modes | 4K UHD |
| Maximum Video Resolution | 4096 x 2160 |
Interfaces/Ports
|
| Network (RJ-45) | Yes |
| HDMI Out | Yes |
| USB | Yes |
| Number of Network (RJ-45) Ports | 1 |
| Number of USB Ports | 1 |
| Number of HDMI Outputs | 1 |
Media & Performance
|
| Media Type Supported | Twisted Pair |
| Twisted Pair Cable Standard | Category 7 |
Power Description
|
| Power over Ethernet (PoE) | Yes |
Physical Characteristics
|
| Receiver Height | 1.02" (25.91 mm) |
| Receiver Width | 4.29" (108.97 mm) |
| Receiver Depth | 5" (127 mm) |
| Receiver Weight (Approximate) | 385.6 g |
Miscellaneous
|
| Application/Usage | Projector |
Warranty
|
| Limited Warranty | 10 Year |
