Tripp Lite's PDU1230 offers 208/240V power distribution with L6-30P input plug, 15-foot cord and 20 total output receptacles. Features 4 front-panel C19 outlets, each protected by separate 15A circuit breakers, 4 front-panel C13 outlets and 12 rear-panel C13 outlets protected in banks of 4 by 4 separate 10A circuit breakers. Detachable mounting flanges are configurable for wallmount, under-counter or 1U/0U rackmount installation. Uses only 1 rack space (1U) when installed in any 19-inch rack, with the potential for 0U vertical mounting in the cable area of most rack enclosures. Detachable flanges with pre-punched access holes and adjustable depth channels allow user configuration in dozens of potential mounting schemes. Attractive housing with 8 front-facing and 12 rear-facing outlets measures only 5.2 inches in depth. Unfiltered electrical pass-through without a power switch makes the PDU1230 ideal for distributing alternate waveform UPS or generator power in rack enclosures.

TRENDnet's 2.5G PoE+ Injector, model TPE-215GI, combines electrical power with a 2.5GBASE-T network connection to produce a 2.5G PoE+ network signal. Auto-sensing technology conveniently delivers the correct wattage needed to power your PoE and PoE+ devices. Connect the 2.5G PoE+ injector to a non-PoE switch, and then run an Ethernet cable with data + power to network a PoE or PoE+ device up to 100 meters (328 ft.) away. Network PoE devices such as wireless access points, IP cameras, VoIP phone systems, IPTV decoders, access controls, and more. NDAA / TAA compliant.

The 2.5G PoE+ injector supplies a PoE device with PoE (15.4W) or PoE+ (30W) power.

Wall-mount design and a sturdy metal enclosure accommodates most installations scenarios.

Equipped with a 2.5GBASE-T RJ-45 port providing network speeds of up to 2.5Gbps over existing Cat5e or better cabling.

Rich, clear sound for every adventure.

With the VisionTek Audio Pro V3, you can listen to your music anywhere you go. Enjoy high-quality sound with rich bass and clear treble. The Waterproof IPX7 rated build makes this an ideal portable speaker to take to the beach or back trails. With TWS technology, you can connect two VisionTek Audio Pro V3 speakers for a true stereo experience.

Features and Benefits | Rich, Clear Music

With dual passive radiators and two built-in speakers, enjoy rich bass and clear treble wherever you go. The speaker and radiator design allows for full 360º sound.

Waterproof & Dustproof

The VisionTek Audio Pro V3 is the ideal portable speaker for on the go people. Its compact stylish design paired with its waterproof and dustproof features mean you don't have to worry about it getting wet. Whether is poolside or at the beach, the IPX7 Waterproof rating allows for up to 30 minutes underwater at a depth up to 3 feet.

Bluetooth 5.0 & NFC Connections

Bluetooth 5.0 technology provides a lower power consumption connection so you can listen to the best songs all day long. With the 30 foot signal range, you're free to move about while enjoying your music. The VisionTek Audio Pro V3 also supports NFC devices for faster pairing.

S200 TG ARGB Snow Mid Tower Chassis

S200 TG ARGB Snow Mid Tower Chassis is an ATX case with a mesh front panel and comes with three preinstalled hydraulic bearing 120mm ARGB Lite front fans. Its RGB lighting can be controlled by motherboard software from ASUS, GIGABYTE, MSI, and ASRock. Besides, up to six 120mm fans can be fitted in the chassis and up to a 360mm radiator can to placed at the front of the S200 TG ARGB Snow mid-tower chassis.

Mesh Front Panel

S200 TG ARGB Snow mid-tower chassis comes with a large airflow-optimized mesh panel featuring an elegantly designed strip and a TT logo at the front for massive airflow performance.

Three Preinstalled Hydraulic Bearing 120mm ARGB Lite Front Fans

S200 TG ARGB Snow mid-tower chassis comes with three pre-installed hydraulic bearing 120mm ARGB Lite fans at the front of the case. Users can enjoy fascinating lighting effects by controlling them through the motherboard software from ASUS, GIGABYTE, MSI, and ASRock.

Built-in PSU Cover

S200 TG ARGB Snow mid-tower chassis features a full length power supply cover providing plenty of space to tuck away cables, while keeping airflow clear for your hard drives and PSU.

Tempered Glass Panel

S200 TG ARGB Snow mid-tower chassis comes with one 3mm tempered glass panel on the left side, thicker and more scratch resistant when compared to standard acrylic. On top of that, the enlarged window design enables you to display and admire all your components in their full RGB glory.

Opportunities For High-End Expansion

S200 TG ARGB Snow mid-tower chassis has good expandability. It can support a CPU cooler with a maximum height of 166mm, VGA placement of up to 330mm in length (without radiator), a power supply with a length of up to 190 mm (with HDD Rack). Optimized for excellent cooling capability, the case comes with three hydraulic bearing 120mm ARGB Lite fans preinstalled at the front; you can also choose to put two 140mm fans at the front and on top, or up to six 120mm fans can be fitted in. For radiator compatibility, it can support up to 360mm at the front, giving more opportunities for high-end expansion!

• PDU1230 PDU Basic 208V / 240V 30A 20 Outlet
• Instruction Manual with Warranty Information

• 2.5G PoE+ Injector
• Quick Installation Guide
• Power cord

• Pro V3 Waterproof Bluetooth Speaker
• 1 x Micro USB Cable
• 1 x 3.5mm Auxillary Cable (2ft)
• 1 x Quick Start Guide

Output Receptacles:

• 4 x C19
• 16 x C13

Arcserve:

• UDP 8300
• UDP 8400
• NAADR065FLW830N00G
• NAADR065FLW840N00G
• NAADR065VUW830N00G
• NAADR065VUW840N00G