The Opengear IM7200 is a state of the art infrastructure management solution which streamlines remote management of network, server and power infrastructure in data center and remote environments, ensuring business continuity, secure and reliable access. The next generation IM7200 combines SmartOOB™ out-of-band management with Failover to Cellular™ and delivers proactive monitoring and remediation.

• 8 - 48 port serial console server. Also available in 16 port + 24 USB 2.0 console ports and 16 port + 24 Gigabit Ethernet Switch
• Dual network connections with built-in Fiber SFP and GbE copper ports
• Software selectable serial pinouts
• PSTN, and optional 4G LTE cellular module for remote Smart OOB™ access during primary outage
• Failover to Cellular™ for out-of-band access
• Centralize the management of all your enterprise data centers and remote sites with Lighthouse 5
• Integrated 802.11a/b/g/n Wi-Fi
• Integrated RESTful API engine on devices running firmware 4.0 or higher
• Zero Touch Provisioning (ZTP) automation over the network, without manual user interaction
• Link Layer Discovery Protocol (LLDP) discover, identify and verify attached devices on your local network.
• AAA including LDAP & TACACS+, lock down ports per user & group
• Enterprise grade security, FIPS 140-2 Validated encryption
• Unified power management of PDU and UPS equipment from 100+ vendors
• Environmental monitoring with optional EMD module
• Nagios and SolarWinds integration
• Audit trail logging to 16GB local storage or remote log server, expandable with SD card

• IM7200 Infrastructure Manager
• Rack Mount Kit - Two ears and screws (Part# 590001)
• A/C Power Cords
• 2 x CAT5 Patch Cable 6'
• Cable Kit - 319014 DB9F-RJ45 Straight, 319015 DB9F-RJ45 Crossover, 319016 DB9M-RJ45 Straight, 319017 DB9F-RJ45 Straight, 319018 DB9F-RJ45 Crossover, 319019 DB9M-RJ45 Straight, 2 x Loopback Test Cable
• Quick Start Guide

• 48 x RS-232 RJ45 serial (software selectable Cisco Straight or Cisco Rolled pinout) & 1 x RJ45 local console
• Dual AC Power Supplies
• 2 x 10/100/1000 Ethernet or Fiber SFP
• 2 x USB 3.0 Host Ports
• 16GB Internal Flash Storage
• v.92 PSTN Modem
• CCC Certified

Memory & CPU

• 1GHz ARM SoC (Marvell 88F6283)
• 256MB SDRAM
• 64MB embedded NOR Flash
• 16 Gigabytes internal flash

• IM7208/IM7216/IM7232/IM7248: 100,000 Hours

• Linux with Source Code Access and Custom Development Kit (CDK)

Security & Authentication

• IPSec & OpenVPN, SSL tunnels, Secure Shell (SSH V2), TACACS+, Kerberos, RADIUS with RSA SecurID and LDAP authentication, PAP/CHAP authentication (dial-up), Dial-back support, Local authentication, System event syslog, Authenticated NTP

Gateway Router

• Stateful firewall, DHCP server, DDNS, Failover, Port forwarding, IP filtering with access control lists

Remote Management

• HTTPS & SSH console, Nagios NSCA & NRPE, SNMP, TFTP & FTP server, Password access control, IP service port control, AJAX web terminal, Auto Response

• Ambient operating temperature: 5°C to 50°C , 41°F to 122°F
• Storage temperature: -30°C to +60°C, -20°F to +140°F
• Humidity: 5% to 90%

Emissions

• FCC Part 15 Subpart B Class A
• ICES-003 Issue 4 February 2004
• AS/NZS CISPR 22: 2004 Class A
• EN 55022 Emissions Class A (2009) A1 (2010)
• EN 55022 Emissions Class A (2009) A1 (2010)
• EN 61000-3-2 Harmonics Current Emissions (2014)
• EN 61000-3-3 Voltage Fluctuation and Flicker (2013)

Immunity

• EN 55024 ITE Immunity (2010)
• IEC 61000-4-2 (2008)
• IEC 61000-4-3 (2006) A1 (2007) A2 (2010)
• IEC 61000-4-4 (2012)
• IEC 61000-4-5 (2014)
• IEC 61000-4-6 (2013)
• IEC 61000-4-8 (2009)
• IEC 61000-4-11 (2004)

• Serial Port: 4kV ESD protection on RS-232 transceivers
• Ethernet Port: 1500V AC isolation shielded with shield connected to chassis ground for signal integrity and ESD protection