The P960-001-MSATA mSATA SSD to 2.5 in. SATA Enclosure Adapter Converter lets you use an mSATA SSD with a standard SATA-enabled computer, drive enclosure or docking station. To share data, just remove the adapter's cover, connect the drive to the mSATA connector, secure it with the included screws, put the cover back, and connect the adapter to your computer's SATA port. Or connect it to your computer's USB port using a USB docking station, such as Tripp Lite's U339-000 (sold separately).

The enclosed housing protects the drive when used in applications requiring more durability, such as hot-swap drive bays and external docking stations. The P960-001-MSATA supports SATA I, II and III drives and data transfer rates up to 6 Gbps. It's plug-and-play, so no software, drivers or external power supply are required.

Features

Use an mSATA SSD as a Standard 2.5 in. SATA SSD

• Access an mSATA drive with a standard SATA computer, drive enclosure or docking station
• Supports SATA I, II and III SSDs (1.5/3.0/6.0 Gbps)
• Maximizes SATA III controller capabilities to boost data transfer speeds up to 6 Gbps
• Enclosed housing protects drive in applications requiring more durability
• High-efficiency mSATA SSD reduces system's power consumption
• Plug-and-play with no software, drivers or external power supply needed
• Works with USB-enabled SATA docking stations, such as Tripp Lite's U339-000 (sold separately)

Toner cartridge delivers quality results in your Kyocera Ecosys M2635dw. Toner produces sharp characters and well-defined images. Easy-to-install cartridge yields approximately 3,000 pages at 5 percent coverage.

This single-port 2.5Gbps PCIe network card offers a versatile and low-cost way to deploy 2.5GbE network connectivity. It adds one copper Ethernet port to your server or desktop computer and provides Multi-Gigabit Ethernet access to your network at four speeds: 2.5 Gbps, 1G, 100Mbps, 10Mbps.

Cost-Effective Multi-Gigabit Ethernet Solution

The 2.5GBASE-T NIC provides additional bandwidth using your existing Ethernet infrastructure to help reduce the cost of cabling upgrades. The card enables you to connect to 2.5GBASE-T and NBASE-T equipment at network speeds of 10Mbps, 100Mbps, 1Gbps, 2.5Gbps over your CAT5e cabling (up to 100 m depending on the network configuration).

Optimal Technology for Optimal Performance

The network adapter card adds one Ethernet port to your workstation through a x4 PCIe slot. It features 2.5GBASE-T technology, supporting advanced Multi-Gigabit systems, including Cisco campus switches and Aruba Networks access points. The network card also supports NBASE-T and additional features including 16K Jumbo Frames, Auto-MDIX and Wake-on-LAN (WoL).

Efficient Ethernet

The Realtek RTL8125 chipset, compliant with IEEE 802.3az and IEEE802.3u supports the PCIe 2.0 interface for PC embedded applications. It provides up to a 250% increase in data rate over Gigabit Ethernet and requires no changes to existing cable infrastructure.

The ST2GPEX is backed by a StarTech.com 2-year warranty and free lifetime technical support.

• mSATA SSD to 2.5 in. SATA Enclosure Adapter Converter
• Mounting Hardware
• Screw Driver
• Owner's Manual

• 2.5Gbps 2.5GBASE-T PCIe Network Card
• 1 x Low-Profile Bracket
• 1 x Quick-Start Guide

• Capacity:7.5 Amp-hours
• Volt-Amp-Hour Capacity: 48 Hours

APC UPS:

• SU700RM(i)2U
• SUA750RM(i)2U

Kyocera ECOSYS Printers:

• M2635dw
• P2235dw

• Manufacturer Selling Program: Arcserve OLP
• Covered Configurations: 2TB hard drive

Arcserve Devices:

• NAADR065FLW81EN00C
• NAADR065NFW81EN00C
• NAADR065VUW81EN00C