FR
Copy the following URL if you wish to email this comparison:
https://www.cendirect.com/main_en/compare.php?rCompList=1074520996-1029393692-
Product Comparison

Remove all

6 max at a time
 

Fluke Networks
DSX-CHA003
$734.10
To Cart
Remove

Elo Touch Solutions, Inc
E380665
$1,154.87
To Cart
Remove
Manufacturer Fluke Networks
Elo Touch Solutions, Inc
Manufacturer Part Number DSX-CHA003
E380665
Manufacturer Website Address https://www.flukenetworks.com
https://www.elotouch.com
Brand Name Fluke Networks
Elo
Product Series DSX
03
Product Model DSX-CHA003
1903LM
Product Name DSX Series Coaxial Adapter
1903LM 19" Medical Grade Touchscreen Monitor
Marketing Information For any coaxial cable, a successful installation is dependent on the use of high quality components and proper installation techniques, especially installation of connectors. When used with the DSX-5000 CableAnalyzer, the DSX-CHA003 Coax Adapter provides you with the capability to characterize the transmission performance of the installed coaxial cabling to assure that it meets the performance expectations for its intended applications. The DSX-CHA003 Coax Adapter supports testing of 50 ohm, 75 ohm, and 93 ohm coaxial cable.

ANSI/TIA-568-C.4 specifies requirements for 75 ohm broadband coaxial cabling to support CATV television, and other applications supported by the star topology defined by ANSI/TIA-568-C.0. In this topology, the cabling segment between the Equipment Outlet and the first Distributor (typically, a splitter) is referred to as Cabling Subsystem 1. Cabling segments between Distributors are referred to as Cabling Subsystem 2 or 3. Both Series 6 (RG6) and Series 11 (RG11) cabling is supported. The length limit for RG6 cabling is 46m (150 feet) for all three Cabling Subsystem. The length limit for RG11 cabling is 90m (285 feet) for Cabling Subsystem 1, and 100m (328 feet) for cabling Subsystem 2 or 3. For each Cabling Series and length limit, TIA-568-C.4 provides limits for Insertion Loss over the frequency range of 5 to 1002 MHz which can be tested using the DSX-CHA003 Coax Adapter. Actual Insertion Loss performance is strongly influenced by the length of the installed coaxial cabling segment. A segment much shorter than 90 meters may meet the limit for a 90m link even though its performance has been significantly degraded by damage to the cable or poorly installed connectors. For this reason, DSX-5000 also provides Length-Scaled test limits which automatically adjust the Insertion Loss limit across the specified frequency range based on the actual measured length of the cabling segment. These Length-Scaled test limits can be recognized by the "LS" at the end of the test limit name.


DICOM Medical Grade Touchscreen Monitors

The 03-Series Medical Grade Touchscreen Monitors merge best-in-class touchscreen technology with DICOM Part 14 functionality to help enhance clinical review for healthcare providers while increasing patient engagement. With a compact form factor and sleek design, the touchscreen monitors are well-suited for EMR documentation, image viewing, clinical collaboration, deployment within the laboratory and pharmacy and for integration into medical devices.

IP-54 Rating

Sealed against dirt, dust and liquids, delivering a reliable, easy-to-sanitize solution.

IEC 60601

IEC 60601 compliant power supply included.

DICOM 14

Ensures accurate and uniform image reproduction for reliable review.

Integrated Touch

TouchPro® PCAP offers a 10-touch tablet-like experience with capability for use with wet or dry gloves.

Built-to-Last

Backed by Elo's 3-year standard warranty with optional EloCare service offerings.

Easy to Clean

Increase safety for healthcare providers and patients with the easy-to-clean touchscreen displays.

DICOM 14 -Designed for Consistent Image Review

Get the image accuracy you need during clinical review with the 03-Series medical grade touch screen monitors. To help ensure healthcare providers and patients can view clear, accurate and consistent medical images, the displays are pre-calibrated from the factory per AAPM secondary display guidelines in compliance with the DICOM 14 GSDF curve.

Enhancing Clinical Workflow with Touch

From analyzing X-rays and scans to reviewing vitals, lab results and medical history, adding touchscreens into the clinical workflow creates efficiencies while improving the patient and provider experience.

Purpose-built for Healthcare

The 03-Series medical grade touch screen monitors offer flexibility for installation in a variety of healthcare environments to support increased communication among patients and healthcare providers.

Medical Device Ready

With a full line of touch technologies and display solutions, Elo can help develop and customize products for almost any medical device including ventilator monitors, anesthesia monitors, patient monitors and medication dispensers. From operating rooms to patient rooms, laboratories and anywhere healthcare is provided, Elo products are well-suited for medical applications where consistent and long-lasting quality and touch performance are critical.

Configurability Made Easy

Flexible Mounting

Every monitor is designed with VESA hole patterns to simplify mounting onto a variety of stands, arms, walls or medical carts.

Privacy Matters

Optional privacy filters offer an additional safeguard when reviewing private health information or sensitive administrative data.

Ergonomic

Optional handles can be added to easily move or rotate the display to a comfortable orientation.

Unified Style Across Sizes

This product is not an FDA-approved "medical device" or otherwise approved by the FDA and is not ISO-13485 compliant. Depending on the intended use, additional certifications may be required.


Packaged Quantity 1
-
Product Type Network Adapter
LCD Touchscreen Monitor
Country of Origin Malaysia
-
Screen Size Class - 19"
Viewable Screen Size - 19"
Screen Mode - SXGA
Panel Technology - Thin Film Transistor (TFT)
Response Time - 14 ms
Aspect Ratio - 5:4
Horizontal Viewing Angle - 178°
Vertical Viewing Angle - 178°
Mount Type - Wall Mountable
Floor-mountable
Pole Mount
Backlight Technology - LED
Features - Anti-glare
On-screen Display (OSD)
OnScreen Control
Horizontal Frequency - 30 kHz to 82 kHz
Vertical Frequency - 50 Hz to 75 Hz
Maximum Resolution - 1280 x 1024
Color Supported - 16.7 Million Colors
Native Contrast Ratio - 1,000:1
Brightness - 250 cd/m²
Speakers - Yes
Touchscreen Type - Projected Capacitive
Multi-touch Screen - Yes
Number of Simultaneous Touchpoints - 10
HDMI - Yes
USB - Yes
VGA - Yes
Number of USB Ports - 4
Frequency - 50 Hz
60 Hz
VESA Mount Compatible - Yes
VESA Mount Standard - 100 x 100
Product Color - Black
White
Height - 13.96" (354.58 mm)
Width - 16.91" (429.51 mm)
Depth - 1.64" (41.66 mm)
Height with Stand - 15.65" (397.51 mm)
Width with Stand - 16.91" (429.51 mm)
Depth with Stand - 7.61" (193.29 mm)
Weight (Approximate) - 4.30 kg
Weight with Stand (Approximate) - 6.30 kg