Sign in -or- Sign up
|
Cart
$0.00
|
Saved Carts
|
Order Status
|
Returns
|
866.367.3061
28 Years of proven quality service
We deliver across Canada
EN
FR
PRODUCTS
Audio Electronics
Cameras
Components
Computers
Electronics
Input Devices
Memory
Monitors / Projec.
Multimedia
Networking
Office Equipment & Supplies
Phones
POS
Power
Printer Supplies
Printers
Software
Storage
Video Communications
Show All Categories
BRANDS
ASUS Computer International
Cisco Systems, Inc
D-Link Systems, Inc
Epson Corporation
HP Inc.
Intel Corporation
LENOVO
Lenovo Group Limited
Lexmark International, Inc
Logitech
Schneider Electric SA
ViewSonic Corporation
Show All Brands
QUOTATION
Popular Searches:
Microsoft Surface Tablets
Lenovo Notebooks
Office 365
Samsung Galaxy Book2
Seagate IronWolf HD/SSD
Toner Cartridges
GO
Product Comparison
Remove all
6 max at a time
C2G
40881
$372.13
To Cart
Remove
Manufacturer
C2G
Manufacturer Part Number
40881
Manufacturer Website Address
https://www.cablestogo.ca
Brand Name
C2G
Product Name
25/70V 50W Audio Amplifier - Plenum Rated
Marketing Information
The 25/70V 50W Audio Amplifier is the ideal solution for supporting a distributed audio system in a classroom, conference room or other environment that requires installation in a plenum space. This amplifier supplies 50 Watts of power, 25 Watts per channel, and is built to an industry standard 25/70 Volt design. This amplifier supports many advanced features which make it a perfect fit for most applications
Noise Reduction:
Audio systems installed in commercial environments are susceptible to noise caused by an electrical ground loop. This will often manifest as a hum or buzz through the system. This amplifier features noise reduction technology on both the 3.5mm and RCA Stereo Audio inputs. This noise reduction eliminates the interference and allows the audio signal to pass through.
Standby Mode:
After five minutes without a signal, the amplifier will enter standby mode providing energy savings. The amplifier will wake from standby mode automatically when a signal is received.
Accessory Power Output:
The accessory power output provides 12 Volts DC and 500 mAmps.
Product Type
Signal Amplifier
Minimum Frequency
100 Hz
Maximum Frequency
20 kHz
Impedance
18 Kilo Ohm
Input Voltage
230 V AC
Product Color
Black
Product Material
Metal
Height
1.49" (37.85 mm)
Width
4.31" (109.47 mm)
Depth
4.54" (115.32 mm)
Weight (Approximate)
1.65 kg
Additional Information
THD + Noise: < ±0.05% @ 1 KHz at nominal level (1 watt)
Signal Noise: >80dB
Input Sensitivity: -10dBV (316mV)
Operating Temperature: 0 TO +50° C / 10% TO 90% RH, Non-condensing
Storage Temperature: -25° TO +70° C / 10% TO 90% RH, Non-condensing
Environmentally Friendly
Yes
Country of Origin
Taiwan
Limited Warranty
1 Year