Sign in -or- Sign up
|
Cart
$0.00
|
Saved Carts
|
Order Status
|
Returns
|
866.367.3061
28 Years of proven quality service
We deliver across Canada
EN
FR
PRODUCTS
Audio Electronics
Cameras
Components
Computers
Electronics
Input Devices
Memory
Monitors / Projec.
Multimedia
Networking
Office Equipment & Supplies
Phones
POS
Power
Printer Supplies
Printers
Software
Storage
Video Communications
Show All Categories
BRANDS
ASUS Computer International
Cisco Systems, Inc
D-Link Systems, Inc
Epson Corporation
HP Inc.
Intel Corporation
LENOVO
Lenovo Group Limited
Lexmark International, Inc
Logitech
Schneider Electric SA
ViewSonic Corporation
Show All Brands
QUOTATION
Popular Searches:
Microsoft Surface Tablets
Lenovo Notebooks
Office 365
Samsung Galaxy Book2
Seagate IronWolf HD/SSD
Toner Cartridges
GO
Product Comparison
Remove all
6 max at a time
C2G
40880
$344.55
To Cart
Remove
Manufacturer
C2G
Manufacturer Part Number
40880
Manufacturer Website Address
https://www.cablestogo.ca
Brand Name
C2G
Product Name
8 Ohm 50W Audio Amplifier - Plenum Rated
Marketing Information
The 8 Ohm 50W Audio Amplifier is the ideal solution for supporting a sound reinforcement system in a classroom, conference room or other environment that requires installation in a plenum space. This amplifier supplies 50 Watts of power, 25 Watts per channel, and is built to an industry standard 8 Ohm design. This amplifier supports many advanced features which make it a perfect fit for most applications.
Audio systems installed in commercial environments are susceptible to noise caused by an electrical ground loop. This will often manifest as a hum or buzz through the system. This amplifier features noise reduction technology on both the 3.5mm and RCA Stereo Audio inputs. This noise reduction eliminates the interference and allows the audio signal to pass through.
After five minutes without a signal, the amplifier will enter standby mode providing energy savings. The amplifier will wake from standby mode automatically when a signal is received.
The accessory power output provides 12 Volts DC and 500 mAmps. This makes the amplifier the perfect match for a controller such as the TruLink® A/V Controller
This amplifier accepts a 3.5mm and RCA Stereo Audio input as well as a 3.5mm Microphone input. The mixing function ensures that audio from all three inputs are mixed and sent to the speaker outputs.
This amplifier is designed to accept either RS232 control or control signals from an industry standard volume control.
The PA sensor will automatically mute the audio inputs of the amplifier allowing the public address to be heard.
Product Type
Amplifier
Minimum Frequency Response
20 Hz
Maximum Frequency Response
20 kHz
Impedance
8 Ohm
Classification
D
RMS Output Power
50 W
Number of Analog Audio Inputs
2
Product Color
Black
Weight (Approximate)
1.21 kg
Environmentally Friendly
Yes
Country of Origin
Taiwan
Limited Warranty
1 Year