• ETHERNET PORT CONFIGURATION: 16 x Gigabit RJ-45 Ports
• GIGABIT SPEEDS: 16 gigabit ports provide high-speed network connections to devices and a 32Gbps switching capacity allows data traffic to flow smoothly, reducing traffic bottlenecks.
• RACKMOUNT DESIGN: The 16 Port Gigabit switch is designed with a sturdy rackmount metal design with a built-in power supply; Rack mount kit included.
• GREENnet ENERGY SAVINGS: The 16-Port Gigabit GREENnet switch, provides high bandwidth performance, ease of use, and reliability; Reducing power consumption by up to 70%. GREENnet technology automatically adjusts power consumption as needed, resulting in substantial energy savings.
• TRENDnet LIFETIME PROTECTION: All metal TRENDnet switches come with lifetime manufacturer protection.
• DATA TRANSFER RATES: Ethernet: 10Mbps (half duplex), 20Mbps (full duplex); Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex); Gigabit: 2000Mbps (full duplex)
• NDAA / TAA compliant (U.S. and Canada only)

The 16-Port Gigabit GREENnet Switch, model TEG-S16g, provides high bandwidth performance, ease of use, and reliability, all while reducing power consumption by up to 70%*. GREENnet technology automatically adjusts power consumption as needed, resulting in substantial energy savings. Embedded GREENnet technology works right out of the box with no management requirement.
Boost office network efficiency and eliminate network congestion with gigabit speeds and a total switching capacity of 32 Gbps with full-duplex mode. A built-in universal power supply reduces cable clutter, and diagnostic LEDs help with network troubleshooting. Plug and Play this sturdy metal switch for reliable high-speed network connectivity.
Gigabit Speeds 16 gigabit ports provide high-speed network connections to devices and a 32 Gbps switching capacity allows data traffic to flow smoothly, reducing traffic bottlenecks.
Rackmount Design With a sturdy metal housing and included rackmount brackets, this switch is well-suited for 19" 1U rack installations. Its fanless design is perfect for quiet environments that require silent operation.
Energy Savings Embedded GREENnet technology provides cost savings and reduces power consumption by up to 70%, by limiting port power consumption during periods of low link utilization.
PACKAGE CONTENTS

• TEG-S16g
• Quick Installation Guide
• Power cord (1.8 m / 6 ft.)
• Rackmount hardware

Charge and Sync Almost Anything

USB has become more than a way of connecting devices to a computer with plug and play ease and high performance, it has also become the method of choice to power and charge a huge range of portable battery-powered devices like cell phones, tablets, USB battery packs, handheld game consoles, e-readers, cameras, smartwatches, fitness trackers, bicycle lights, and many more.

Some of those mobile devices have adopted proprietary mechanisms to draw more power than USB was originally designed to allow which has caused confusion about charging but is now being solved by the USB-IF (USB Implementers Forum) Battery Charging (BC) standard.

The Plugable USB 2.0 4-Port Hub (USB2-HUB4BC) does everything existing USB hubs do, plus has support for the Battery Charging standard. So it's a no-compromise solution for both gaining extra USB ports, and for charging the newer generation of BC standard compliant devices. When a compliant device is attached it can charge at a faster rate (up to 1.5A vs 500mA of a standard port).

USB Battery Charging

Since the hub conforms to the USB Battery Charging specification, nearly any modern device will charge when connected. If the hub is connected to a host computer, you can also transfer photos or other files on the device to your computer.

Incompatible devices include early generation iPads and iPhones that don't use the Lightning connector, some older Android phones, and some of the larger Windows tablets. All of these devices require proprietary signaling and need a special charger.

USB 2.0 Connectivity

For basic USB connectivity, this hub works well with most devices. USB 2.0 has been the standard for device connections for quite a few years, so there are generally no surprises with a USB 2.0 hub.

Even USB 3.0 devices work on this hub because of backward compatibility. However, they will be limited to the USB 2.0 maximum of 480Mbps.

Size

The hub body measures 2.5in x 1.5in x 0.75in, plus the external power adapter.

The power adapter is not required for basic, low current, non-charging USB connectivity (up to 100mA per port), but we recommend using it for most situations.

Raspberry Pi

The hub pairs well with a Raspberry Pi because of its diminutive size. In the snake-eating-tail configuration, this hub can provide 3 extra ports, and simultaneously power the Pi.

Compatibility

• USB 2.0 has been ubiquitous for many years, nearly every operating system supports hosting USB 2.0 hubs
• Common exceptions to this are some Android tablets using an OTG cable, and car stereos, which do not support USB hubs

ATX 3.0 & PCIe Gen 5.0 Ready | Toughpower GF A3 Gold | Power Up the Next Generation Hardware

To fully support next-gen hardware, Toughpower GF A3 Gold Series (650W/750W/850W/1050W/1200W) is designed to meet ATX 3.0 standards, including a PCIe Gen 5.0 12VHPWR connector. The GF A3 Gold series delivers 80 PLUS Gold efficiency, it also offers stability, durability, and reliability.

Fully Compatible with Intel ATX 3.0 Standards

Toughpower GF A3 Gold series is fully compatible with Intel ATX 3.0 Specifications which supports up to 200% power excursion, reaches 60% low load efficiency and complies with required power supply timing standards.

PCIe Gen 5.0 Ready

Toughpower GF A3 Gold series comes with a 16pin connector to offer powerful and stable performance allowing the PSU to natively run next-generation GPUs.

The wattage marked on the 12VHPWR's connector is the recommended wattage. (Ref. Intel design guideline) The native 16 PIN (12VHPWR) PCIe connector of the GF A3 750W can deliver up to 300W for PCIe 5.0 graphics cards.

Made to Comply with the Latest Graphics Cards

As the power consumption of graphics cards increase, so has their demand for power. The GF A3 series is designed to support NVIDIA and AMD graphics cards, and are ready to supply the graphics cards according to their different connections.

Be Smart, Stay Quiet

Featuring a 120mm fluid bearing fan to deliver excellent airflow. Furthermore, the Smart Zero Fan will the fan will not spin until the load exceeds 30% of the power supply, minimizing undesired noise.

High Quality Japanese Main Electrolytic Capacitor

High quality Japanese main electrolytic capacitor greatly improves the power supplies durability and ensures the Toughpower GF A3 series is stability and reliability.

High Amperage Single +12V Rail & High-Class Technologies

Powerful single +12V rail can properly deliver the power you need for the best compatibility. The use of LLC and DC to DC circuit design provides very stable operation and enhanced voltage regulation.

• OCP Over Current Protection
• OVP Over Voltage Protection
• UVP Under Voltage Protection
• OPP Over Power Protection
• SCP Short Circuit Protection
• OTP Over Temperature Protection

Built-in Industrial Grade Protection

To protect the hardware, GF A3 is built with industry grade protections: OCP(Over Current Protection), OVP (Over Voltage Protection), UVP(Under Voltage Protection), OPP(Over Power Protection), SCP(Short Circuit Protection), OTP(Over Temperature Protection).

• TEG-S16g Unmanaged Ethernet Switch
• Multi-Language Quick Installation Guide
• Power cord (1.8m / 6ft.)
• Rackmount hardware

• 1 x USB 2.0 4-PORT HUB WITH 12.5W POWER ADAPTER WITH BC 1.2 CHARGING
• 1 x USB Mini-B to USB-A Cable
• 1 x 12.5W Power Adapter

• AMD EPYC 7000 Series Processors
• Supermicro H11 Generation 4U Servers