FR
Home  Power  Power Injectors/Splitters  AIR-PWRINJ-60RGD1= 

Cisco Aironet PoE Injector - 120 V AC, 230 V AC Input - 55 V DC, 2 A Output - 1 x Ethernet Input Port(s) - 1 x Ethernet Output Port(s) - 60 W - Pole/Wall-mountable

Cisco Aironet PoE Injector - 120 V AC, 230 V AC Input - 55 V DC, 2 A Output - 1 x Ethernet Input Port(s) - 1 x Ethernet Output Port(s) - 60 W - Pole/Wall-mountable
Cisco Aironet PoE Injector - 120 V AC, 230 V AC Input - 55 V DC, 2 A Output - 1 x Ethernet Input Port(s) - 1 x Ethernet Output Port(s) - 60 W - Pole/Wall-mountable

Cisco Systems_ Inc
AIR-PWRINJ-60RGD1= Image
Photo is for Illustration purposes only. Actual Product may be different.
Part Num: AIR-PWRINJ-60RGD1=
Condition: Brand New
$873.00

Add To Cart

BUY MORE & SAVE

Total price is...

Quantity in stock as of last update: No



Click here to view
real-time quantity



Availability will be displayed by province.
In Stock Alert
Compare to other products

The power injector increases wireless LAN deployment flexibility of the access point by combining 55-VDC power with the data signal, and sending both to the connected access point.

The power injector combines 55-VDC power (supplied by internal power supply) with the data signal, sending both to the access point. The power injector provides up to 60 W over all four wire pairs of shielded, outdoor rated Ethernet cable.

The total length of the Ethernet cable from the AP to the switch must not exceed 320 ft (100 m). The wire gauge of the cable must be 26 AWG.

The Ethernet cable from the switch to the power injector must be a shielded CAT5e or higher Ethernet cable. The Ethernet cable from the power injector to the access point must be a shielded outdoor-rated CAT5e or higher Ethernet cable with a 0.20 to 0.35 inch diameter.

A shielded, outdoor Ethernet cable connects the power injector to a 10/100/1000 Ethernet switch, hub, or network, and another shielded, outdoor cable carries power and data to the access point's Ethernet port. The power injector's AC power receptacle connects an approved AC power cord to a wall outlet or power strip. The power injector can be mounted on most horizontal and vertical surfaces, but must be mounted in a vertical orientation to comply with safety requirements.

General Information
Manufacturer

Cisco Systems, Inc

Manufacturer Part Number

AIR-PWRINJ-60RGD1=

Manufacturer Website Address

https://www.cisco.com

Brand Name

Cisco

Product Line

Aironet

Product Name

Aironet PoE Injector

Product Type

PoE Injector


 
Technical Information
Protection Type

Surge Protection


 
Power Description
Input Voltage

120 V AC   |   230 V AC

Maximum Output Voltage

55 V DC

Maximum Output Current

2 A

Maximum Output Power

60 W


 
Interfaces/Ports
Input Ports

1 x Ethernet

Output Ports

1 x Ethernet


 
Physical Characteristics
Mount Type

Pole/Wall-mountable

Height

2.75" (69.85 mm)

Width

5.90" (149.86 mm)

Length

8.42" (213.87 mm)

Weight (Approximate)

1.35 kg


 
Miscellaneous
Compatibility

Cisco Aironet 1560 Series Outdoor Access Points

Certifications & Standards

  • CE
  • IEEE 802.3af
  • IEEE 802.3at
  • FCC Part 15, Class B
  • CE, EN50522 Class B
  • EN55024
  • VCCI
  • EN61000-4-5 Class 5 (6kV CM)
  • UL60950-1
  • UL60950-22
  • GS
  • Environmentally Friendly

    Yes

    Country of Origin

    Philippines


     
     
    Need additional info on this product? Ask us!

    Verification code
    captcha
    In the box below, please enter the above

      Submit Question
    IN-STOCK ALERT
    Please fill in your email address and we will notify you if this item arrives in stock within the next 90 days.